|
Processing
Cutting
Hand circular saw
| Diameter |
Teeth |
Speed |
Blade thickness |
Saw-blade height |
| 150 mm |
36 |
4000 rpm |
2,5 mm |
15 mm |
| 200 mm |
46 |
4000 rpm |
3,0 mm |
20 mm |
Stationary circular saw
| Diameter |
Teeth |
Speed |
Blade thickness |
Saw-blade height |
| 300 mm |
72 |
6000 rpm |
3,4 mm |
30 mm |
| 350 mm |
84 |
5000 rpm |
4,0 mm |
35 mm |
| 400 mm |
96 |
4000 rpm |
4,8 mm |
40 mm |
Feed
7-22 m/min
Tooth
Hard metal wood-working tools, carbide-tipped alternate tooth or trapezoidal flat tooth.
Jig saw
Carbide-tipped saw; interior corners of cut-outs should be drilled with 6 mm hole diameter.
Entering tooth
At the decorative side of the panel
Cut edges
The best result are ontained with stationary tools; any sharp edges can be removed with sandpaper.
Rake angle
A rake angle of 450 gives the best cutting performaces.
Drilling
Carbide-tipped HSS-drill, top angle 60-800.
Panels should be drilled with support sheets
| Diameter |
Speed |
Feed |
| 5 mm |
3000 rpm |
60-120 mm/min |
| 7-8 mm |
2000 rpm |
40-80 mm/min |
| 10 mm |
1500 rpm |
30-60 mm/min |
|
|
|
